Storage period：Nine months. place of origin：Panyu, Guangzhou
brand：Hengya series. Curing conditions：Room temperature curing
Hengya Fireproof glue bottle
Hengya Fireproof glue black colloid
Hengya Fireproof glue white colloid
Hengya Fireproof glue gray colloid
1. Excellent flame retardant performance, reaching the highest level of GB/T2408 standard :V-0; the highest level of fire resistance up to GB23864 standard: A3;
2. No smoke or toxic gases will be emitted during combustion;
3. Single component, easy to use, good extrudability and thixotropy at 4C ~ 40mm;
4. Neutral causation, non-corrosive to metal, coated glass, concrete, marble, granite and other building materials;
5. Excellent weathering resistance, uv resistance, ozone resistance, water resistance: excellent high and low temperature resistance, no brittle, hardening or cracking at -50C after curing, no soft degradation at 150C, maintaining good elasticity;
6. Excellent adhesion to most building materials; It has good compatibility with other neutral silicone gels.
1. Fire seal on each floor of curtain wall project;
2. All kinds of doors and Windows as well as fire seals installed by doors and Windows;
3, hotels, hotels, theaters and other public places waterproof and moisture-proof, decorative fire seal;
4. Fire partition and fire seal of interior decoration;
5. Other industrial USES.
The storage period is 9 months from the date of production.
Restrictions on use
Neutral adhesive: can not be used for structural bonding of full hidden or semi hidden glass curtain wall
It can't be used on the back of copper mirror because ketoxime glue will slightly corrode the copper material.
It should not be used on all material surfaces that will exude grease, plasticizer or solvent.
It is not suitable for airtight places, because silicone adhesive needs to absorb moisture in the air and solidify.
Not suitable for frosted or wet surfaces.
It is not suitable for continuous immersion or wet place all year round.
When the material surface temperature is lower than 15 ℃ or more than 27 ℃, it is not suitable for construction.
The company's products strictly implement relevant standards and ensure that all the indexes can meet the standard requirements, but based on the specific conditions of construction (including base material, construction method, climate, etc.), the test in advance to ensure that the product conforms to the specific purposes, and not by that domestic capital. Therefore, it must be fully tested in advance and independently determined to achieve satisfactory results before it can be widely used. The company should take the responsibility for violation of quality guarantee is limited to return the purchase cost pay or return the product .At the same time the company is willing to provide product technical support, for the further information,please contact the dealer for details.