Product features

1.378 as one component, ketoxime type, room temperature curing all-round King Engineering Structure weather resistant adhesive. 

2. It has excellent anti-aging, weather resistance and ozone resistance. 

3. It has excellent adhesion and good adhesion to sprayed aluminum, concrete and most building materials without primer. 

Main usage 

1. The curtain wall is weatherproof and sealed.

2. Weather proof and airproof roof of sunlight shed.

3. Stainless steel bonding.

4. Dry hanging stone seal, stone and other substrate bonding seal.

5. Cabinet installation, sealing and bonding.

6. The bathroom is installed with waterproof seal.

7. Advanced weather proof sealing for doors and windows.

8. Interior decoration, skirting line sealing, ceiling bonding sealing.

9. The exterior wall is sealed with joints, waterproof and weather resistant.

10. Aluminum plastic plate bonding seal.

11. Ceramic Engineering joint sealing. 

Shelf life

The storage period is 9 months from the date of production.

Restrictions on use

Neutral adhesive: can not be used for structural bonding of full hidden or semi hidden glass curtain wall 

 It can't be used on the back of copper mirror because ketoxime glue will slightly corrode the copper material.

 It should not be used on all material surfaces that will exude grease, plasticizer or solvent.

 It is not suitable for airtight places, because silicone adhesive needs to absorb moisture in the air and solidify.

 Not suitable for frosted or wet surfaces.

 It is not suitable for continuous immersion or wet place all year round.

 When the material surface temperature is lower than 15 ℃ or more than 27 ℃, it is not suitable for construction.

Disclaimer

The company's products strictly implement relevant standards and ensure that all the indexes can meet the standard requirements, but based on the specific conditions of construction (including base material, construction method, climate, etc.), the test in advance to ensure that the product conforms to the specific purposes, and not by that domestic capital. Therefore, it must be fully tested in advance and independently determined to achieve satisfactory results before it can be widely used. The company should take the responsibility for violation of quality guarantee is limited to return the purchase cost pay or return the product .At the same time the company is willing to provide product technical support, for the further information,please contact the dealer for details.